Comfort-Air™ 15R1-S-DN5 100 Complete Filter Assembly, S, Cradle Suspension, Saf-Twist™ Connection, Resists: Welding, Dusts and Non-Oil Mists
Part #MD1SDN5
$15.00 / Each
Pack: 1/PK
Comfort-Air™ sets the standard for comfort and compatibility. Molded from pure silicone, the wide interior flange, deep chin cup and rolled edges of the Comfort-Air™ mask make it the "hands down" favorite for long term comfort and fit. The textured no-slip face seal and swivel retainers ensure proper placement. Extra large inhalation valve, unique corrugated exhale valve and minimized "dead air" space provide low breathing resistance and added comfort. Patented multi-position cartridge placement and low-fitting mask design allow maximum compatibility with other PPE. NIOSH approved.
Item Features
- Facepiece low profile design fits under most grinding and welding helmets, also provides extended field of vision
- Large inhalation valves (size of a quarter) allows for maximum inhalation
- This allows the user to inhale a larger volume of air per breathe reducing breathing resistance while increasing user comfort and productivity
- Exhalation valve strategically positioned under the nostrils and in front of the month ensures hot, exhale air exits the mask immediately
- This improves user comfort while improving productivity
- Exhalation valve diaphragm has channels that act like a parachute
- Traps exhaled air and lifts diaphragm off the valve seat with very little effort
- This creates more space for air to exit the mask reducing heat build up inside the mask, improves user comfort and productivity
- Extra large face seal surface provides superior comfort and improves fitting capabilities
- Does not require user to adjust straps excessively tight
- Fits a wider variety of facial features more comfortably
- Textured finish on the sealing area reduces the risk of the mask slipping on the face
- This ensures a comfortable seal on a wide variety of facial sizes
- Mask is designed to allow for the proper fitting of most safety and prescription eyewear and goggles
- Enhanced harness assembly features metal tabs at end to prevent nylon strap fraying and allows for adjustment when wearing gloves
- Wide nylon strap is more comfortable against the skin and maintains its elasticity longer
- Four point swiveling adjustments allows the mask to be adjusted to the individual features of the wearer
- Craddle suspension fits comfortably under suspension systems for hard hats, grinding and welding helmets
- Three position adjustment allows you to adjust cartridge to three different positions on all Comfort-Air™ face piece
- N95 non-oil base particulate aerosols
Description
Comfort-Air™ sets the standard for comfort and compatibility. Molded from pure silicone, the wide interior flange, deep chin cup and rolled edges of the Comfort-Air™ mask make it the "hands down" favorite for long term comfort and fit. The textured no-slip face seal and swivel retainers ensure proper placement. Extra large inhalation valve, unique corrugated exhale valve and minimized "dead air" space provide low breathing resistance and added comfort. Patented multi-position cartridge placement and low-fitting mask design allow maximum compatibility with other PPE. NIOSH approved.
Item Features
- Facepiece low profile design fits under most grinding and welding helmets, also provides extended field of vision
- Large inhalation valves (size of a quarter) allows for maximum inhalation
- This allows the user to inhale a larger volume of air per breathe reducing breathing resistance while increasing user comfort and productivity
- Exhalation valve strategically positioned under the nostrils and in front of the month ensures hot, exhale air exits the mask immediately
- This improves user comfort while improving productivity
- Exhalation valve diaphragm has channels that act like a parachute
- Traps exhaled air and lifts diaphragm off the valve seat with very little effort
- This creates more space for air to exit the mask reducing heat build up inside the mask, improves user comfort and productivity
- Extra large face seal surface provides superior comfort and improves fitting capabilities
- Does not require user to adjust straps excessively tight
- Fits a wider variety of facial features more comfortably
- Textured finish on the sealing area reduces the risk of the mask slipping on the face
- This ensures a comfortable seal on a wide variety of facial sizes
- Mask is designed to allow for the proper fitting of most safety and prescription eyewear and goggles
- Enhanced harness assembly features metal tabs at end to prevent nylon strap fraying and allows for adjustment when wearing gloves
- Wide nylon strap is more comfortable against the skin and maintains its elasticity longer
- Four point swiveling adjustments allows the mask to be adjusted to the individual features of the wearer
- Craddle suspension fits comfortably under suspension systems for hard hats, grinding and welding helmets
- Three position adjustment allows you to adjust cartridge to three different positions on all Comfort-Air™ face piece
- N95 non-oil base particulate aerosols
Specifications
- BrandComfort-Air™
- ColorBlue
- Connection TypeSaf-Twist™, Saf-Twist™/Swivel
- Filter ClassN95
- Filter Efficiency95 %
- Filters and Cartridges TypeMulti-Position
- FinishTextured
- Headstrap TypeNylon Elastic
- MaterialSilicone
- Overall Depth4 in
- Overall Height5 in
- Overall Width7 in
- ResistsWelding, Dusts and Non-Oil Mists
- Series100
- SizeS
- Suspension TypeCradle