Haws® AXION® 9201EW Emergency Tempering Thermostatic Mixing Valve, 1/2 in Nominal, FNPT End Style, 125 psi Pressure, 1 to 10 gpm Flow, Brass Body
Part #BH9201EW
$814.54 / Each
Model 9201EW (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to a single emergency eye/face wash fixture requiring flow up to 10 gpm (37.8 L). Unit employs a paraffin filled thermostatic mixing element. Cold Water Bypass flow rate of 3.8 gpm (14.4 L). A 0.4 gpm (1.5 L) hot water flow if cold supply fails. The modular brass design with supplied check valves, oversized valve seats and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 deg F (29 deg C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 90 deg F (16 - 32 deg C). Min/max inlet hot water temperature: 120 deg /180 deg F (49 deg /82 deg C), with recommended inlet temperature: 140 deg F (60 deg C). Min/max inlet cold water temperature: 40 deg /65 deg (4.4 deg /18.3 deg C). Inlets and outlet: 1/2 in FNPT.
Item Features
- AXION®'s superior design and technology provide a complete safety solution for increased victim comfort
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Cold Water Bypass flow rate of 3.8 gpm (when tested under conditions specified in ASSE 1071)
- Modular brass design with supplied check valves
- Over-sized valve seats resist failures caused by foreign matter
- Efficient funnel design improves temperature control at low flow rates
- Extended warranty
- Fully assembled
- In-line strainer
- Internal check stops
- System certified
- Thermostatic protection
Description
Model 9201EW (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to a single emergency eye/face wash fixture requiring flow up to 10 gpm (37.8 L). Unit employs a paraffin filled thermostatic mixing element. Cold Water Bypass flow rate of 3.8 gpm (14.4 L). A 0.4 gpm (1.5 L) hot water flow if cold supply fails. The modular brass design with supplied check valves, oversized valve seats and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 deg F (29 deg C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 90 deg F (16 - 32 deg C). Min/max inlet hot water temperature: 120 deg /180 deg F (49 deg /82 deg C), with recommended inlet temperature: 140 deg F (60 deg C). Min/max inlet cold water temperature: 40 deg /65 deg (4.4 deg /18.3 deg C). Inlets and outlet: 1/2 in FNPT.
Item Features
- AXION®'s superior design and technology provide a complete safety solution for increased victim comfort
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Cold Water Bypass flow rate of 3.8 gpm (when tested under conditions specified in ASSE 1071)
- Modular brass design with supplied check valves
- Over-sized valve seats resist failures caused by foreign matter
- Efficient funnel design improves temperature control at low flow rates
- Extended warranty
- Fully assembled
- In-line strainer
- Internal check stops
- System certified
- Thermostatic protection
Specifications
- BrandHaws®
- Body MaterialBrass
- Dimensions5 in L x 1-5/8 in W x 3-1/2 in H
- End StyleFNPT
- Flow Capacity1 to 10 gpm
- MediaHot/Cold Water
- Nominal Size1/2 in
- Pressure Rating125 psi
- Temperature Rating85 deg F
- Top to Inlet Center1-3/8 in
- TypeEmergency Tempering