NLT© Genesis Cap Lamp w/ Adjustable Clip

7,000 Lux, Smart, Cordless and Intrinsically Safe Cap Lamp

• Light output: 7,000 Lux
• Run time: Main LED: 14 hrs minimum, Low-Light/Emergency LED: 7 days minimum
• Tracking-tag or proximity tag-enabled
• Available in MSHA, IECEx / ATEX, ANZEx and non-certified models
• MSHA-certified with Extronics / AeroScout tracking tag
• Customizable for bidirectional communication
• IP67 
• Serviceable battery and components
• 1-year warranty
• Flexible hardhat mounting options – fixed and adjustable clips
• Multiple charger configuration options (single, 4-unit, 10-unit, 24-unit and 48-unit)
• Anti-theft locking device
• Vehicle charger

Smart Features:

Tracking-tag (Wi-Fi, RFID, Bluetooth or LTE) or proximity-tag enabled

• Tags are primarily used for location tracking of personnel and access control. A key benefit is pinpointing the location of miners during an emergency. Proximity tags are used for worker safety.

Tag is powered by the lamp

• Once installed into the NLT lamp, there is never a need to change the tag battery. The Genesis lamp provides optimum power for the tag.

Bidirectional communication

• Limited bidirectional capability is enabled through the push button on the headpiece. This button is used for a variety of functions, including (but not limited to) emergency assistance (man-down) requests, acknowledging a signal/warning or triggering a warning/alarm.

Programmable cap lamp lights

• The fully programmable cap lamp light can be used for a variety of notifications, including safety or operational alerts, e.g., for a man-down or evacuation signal, it can flash in a pre-programmed sequence. It can also be used to signal shift change or report-to-surface instructions.

Integrated

• By having the tag integrated into the cap lamp, the tag will not get left behind. Having the tag always on the miner is a very important safety consideration.