3M™ Multi Gas/Vapor Cartridge/Filter - Help Protect your Workforce

The 3M™ multi gas/vapor cartridge/filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde or hydrogen fluoride and non-oil and oil particulate concentrations up to 10 times the permissible exposure limit (PEL) with half face pieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining and primary metals. This multi gas/vapor cartridge/filter combination works with 3M™ half and full face pieces 6000, 7000 and FF-400 series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for occupational safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non-oil and oil particulates. The cartridge/filter has been assigned the color code magenta/olive in the NIOSH system. Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a federal government regulatory agency, has tested and approved the 3M™ multi gas vapor cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates.